Skip to product information

Finishes

Flopoxy Fast Set - Resin + Hardener Epoxy Kit

Flopoxy Fast Set - Resin + Hardener Epoxy Kit

Regular price $59.95
Sale price $59.95 Regular price $59.95 Sale Sold out
Shipping calculated at checkout.
Only a few left.
Shop by: 0.5 Gallon Kit

Add $99 more to your cart for free shipping.

View full details

Flopoxy Fast Set Resin & Hardener Epoxy Kit

***THIS PRODUCT CANNOT BE SHIPPED INTERNATIONALLY. PLEASE CONFIRM YOUR SHIPPING ADDRESS BEFORE PURCHASING THIS ITEM. ANY INTERNATIONAL ORDERS CONTAINING THIS ITEM ARE SUBJECT TO BE CANCELLED AND REFUNDED***

 Click HERE to download the Safety Data Sheet Part A Part B

Kit Sizes

  • 16oz Kit = 8oz A + 8oz B
  • 0.5 Gallon Kit = 32oz A + 32oz B
  • 1 Gallon Kit = 0.5 gal. A + 0.5 gal. B
  • 2 Gallon Kit = 1 gal. A + 1 gal. B

EPOXY SPECIFICATIONS

  • Ideal Curing Temp: 65-80 F
  • Mixing Time: Approximately 3-4 minutes (depending on amount being mixed, as well as how thoroughly it is being stirred) 
  • Working Time: 15 minutes
  • Dry-to-touch: 2.5-4 hours
  • Full Cure: 24 hrs
  • Heat Tolerance: 500 Degrees Fahrenheit
  • Maximum recommended coating thickness: 1/8”
  • Maximum recommended casting thickness: ½” – even ¾” as long as total mass of pour is small
  • Shore D Hardness: 80D

 

SAFETY

First things first!  ALWAYS observe these basic safety requirements.

  1. We advise using a Respirator to protect your lungs.
  2. Craft in a well ventilated room to protect yourself and others
  3. Use gloves!  It is important to not expose yourself or your lungs to the epoxy.
  4. Use Safety Eye Goggles, it is important to keep your eyes and face protected from the epoxy.

(Constant exposure can cause reactions to your skin or may make you allergic to the epoxy)

FDA Food Safe Rating

  • The Flopoxy product combination was tested by an independent laboratory and was found to comply with 21 CFR 175.300 (as published in the Code of Federal Regulations) for resinous and polymeric coatings that may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food when accurately measured, thoroughly mixed, and fully cured.
  • Prior to using accurately measured, thoroughly mixed, and fully cured epoxy-coated objects for food applications, thoroughly wash the surface with a water and dishwashing detergent solution, rinse, and allow to dry. 

FAQ’s 

 

Q- Will this be self leveling and self healing?

A- Yes, this is both self leveling and self healing

 

Q- Is it UV resistant?

A- Yes, it has stabilizers/ inhibitors for UV

 

Q- Does this product have a strong smell? 

A- It has very minimal to no smell once it's mixed, applied and cured.

 

Q- Can it be used as a top coat?

A- Yes

 

Q- Does this need heat to cure?

A- Heat is not necessary to cure

 

Q- Is this good for light colored cups? 

A- Yes

 

Q- What temp should my work space (room) be while epoxying? 

A- Between 65-80 degrees Fahrenheit

 

Crafter Resources

Check out related DIY guides for helpful info and ways to craft with this item.

How to Make an Epoxy Glitter Tumbler

Go to Guide

Get Started: Epoxy Tumblers

Go to Guide

FAQ: Epoxy Crafting

Go to Guide

Glitter Guide

Go to Guide

Join & Craft Live With Us Every Tuesday!

Go to Guide

Shipping & Returns



Order Processing

Orders are shipped within 2-3 business days of purchase. Orders placed on the weekend or holidays will start processing on the following business day. Processing times may increase during peak seasons.

Example - An order placed on Saturday will start processing Monday and will leave our warehouse by Wednesday. We do our best to get orders out as quickly and efficiently as possible.

Same Day Rush Processing $10
We offer rush processing at checkout for $10. With this option, your order will receive priority fulfilliment and ship out of our warehouse on same day. The cutoff time for this service is 3pm MST, if Same Day Processing is requested after 3pm MST, your order will ship the following day. 

Same Day processing service is not expedited shipping. 

 

 

Shipping

Free Shipping on orders $99+ in the Continental USA

All rates - Continental USA (Contiguous 48)
• $6.95 when spending $0-$9.99
• $12.95 when spending $10-$98.99
• Free when spending $99+
• Expedited shipping options available at checkout

Alaska, Hawaii, Territories & Military
Price will be calculated at checkout based on your location. These orders are typically only shipped via USPS Priority.

See FEDEX shipping delivery times by zone from our warehouse in Arizona. 

 


International Shipping
Shipping & duty will be calculated at checkout based on your location. Customs clearance, taxes and duty charges are included in the calculated rate.

Track Your Shipment
A shipment confirmation with tracking information will be sent to your email once the package has been scanned in by the carrier. Oftentimes the packages are scanned late at night.

 


 

 

Local Pickup

Free! We are located at 6100 W Gila Springs Place Suite 13 Chandler, AZ 85226, Open hours are M-F 10AM-5PM. Customers will receive an email once the order is ready for pickup.

 


 

 

Returns

By submitting a request through MakerFlo Crafts, you agree to the conditions listed below. We made these arrangements to ensure you are fully aware of our return procedures. These agreements apply to MakerFlo Crafts customers. 


14-Day Return Policy

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.


Return Conditions

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.


There is a 15% Restocking Fee on Unused Equipment Returns (Printers, Laser Machines, Oven, and Heat Presses).


Return Process 

To start a return, you can contact us at sales@Makerflo.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return questions at sales@Makerflo.com


How can customers return your products?

To initiate a return, just pack up the items you are wanting to return, and have it dropped off at FedEx. The cost of return shipping will have to be incurred by the buyer, unless the items arrived damaged or defective to the customer. Please put a note inside the box saying Return For Refund and the Order Number.


Damages and issues

Please inspect your order upon reception and contact us immediately if the item is defective, or damaged or if you receive the wrong item so that we can evaluate the issue and make it right.


Exchanges

We only exchange products that are damaged, wrong product, wrong size, or defective. If you need to exchange an item please contact us at sales@makerflo.com. The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

If you have any questions about our return policy please contact our customer support team at sales@makerflo.com.


Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded within 7 to 10 business days on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.


 

details

+ -

Flopoxy Fast Set Resin & Hardener Epoxy Kit

***THIS PRODUCT CANNOT BE SHIPPED INTERNATIONALLY. PLEASE CONFIRM YOUR SHIPPING ADDRESS BEFORE PURCHASING THIS ITEM. ANY INTERNATIONAL ORDERS CONTAINING THIS ITEM ARE SUBJECT TO BE CANCELLED AND REFUNDED***

 Click HERE to download the Safety Data Sheet Part A Part B

Kit Sizes

  • 16oz Kit = 8oz A + 8oz B
  • 0.5 Gallon Kit = 32oz A + 32oz B
  • 1 Gallon Kit = 0.5 gal. A + 0.5 gal. B
  • 2 Gallon Kit = 1 gal. A + 1 gal. B

EPOXY SPECIFICATIONS

  • Ideal Curing Temp: 65-80 F
  • Mixing Time: Approximately 3-4 minutes (depending on amount being mixed, as well as how thoroughly it is being stirred) 
  • Working Time: 15 minutes
  • Dry-to-touch: 2.5-4 hours
  • Full Cure: 24 hrs
  • Heat Tolerance: 500 Degrees Fahrenheit
  • Maximum recommended coating thickness: 1/8”
  • Maximum recommended casting thickness: ½” – even ¾” as long as total mass of pour is small
  • Shore D Hardness: 80D

 

SAFETY

First things first!  ALWAYS observe these basic safety requirements.

  1. We advise using a Respirator to protect your lungs.
  2. Craft in a well ventilated room to protect yourself and others
  3. Use gloves!  It is important to not expose yourself or your lungs to the epoxy.
  4. Use Safety Eye Goggles, it is important to keep your eyes and face protected from the epoxy.

(Constant exposure can cause reactions to your skin or may make you allergic to the epoxy)

FDA Food Safe Rating

  • The Flopoxy product combination was tested by an independent laboratory and was found to comply with 21 CFR 175.300 (as published in the Code of Federal Regulations) for resinous and polymeric coatings that may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food when accurately measured, thoroughly mixed, and fully cured.
  • Prior to using accurately measured, thoroughly mixed, and fully cured epoxy-coated objects for food applications, thoroughly wash the surface with a water and dishwashing detergent solution, rinse, and allow to dry. 

FAQ’s 

 

Q- Will this be self leveling and self healing?

A- Yes, this is both self leveling and self healing

 

Q- Is it UV resistant?

A- Yes, it has stabilizers/ inhibitors for UV

 

Q- Does this product have a strong smell? 

A- It has very minimal to no smell once it's mixed, applied and cured.

 

Q- Can it be used as a top coat?

A- Yes

 

Q- Does this need heat to cure?

A- Heat is not necessary to cure

 

Q- Is this good for light colored cups? 

A- Yes

 

Q- What temp should my work space (room) be while epoxying? 

A- Between 65-80 degrees Fahrenheit

 

Craft Guides

+ -

Crafter Resources

Check out related DIY guides for helpful info and ways to craft with this item.

How to Make an Epoxy Glitter Tumbler

Go to Guide

Get Started: Epoxy Tumblers

Go to Guide

FAQ: Epoxy Crafting

Go to Guide

Glitter Guide

Go to Guide

Join & Craft Live With Us Every Tuesday!

Go to Guide

shipping

+ -

Shipping & Returns



Order Processing

Orders are shipped within 2-3 business days of purchase. Orders placed on the weekend or holidays will start processing on the following business day. Processing times may increase during peak seasons.

Example - An order placed on Saturday will start processing Monday and will leave our warehouse by Wednesday. We do our best to get orders out as quickly and efficiently as possible.

Same Day Rush Processing $10
We offer rush processing at checkout for $10. With this option, your order will receive priority fulfilliment and ship out of our warehouse on same day. The cutoff time for this service is 3pm MST, if Same Day Processing is requested after 3pm MST, your order will ship the following day. 

Same Day processing service is not expedited shipping. 

 

 

Shipping

Free Shipping on orders $99+ in the Continental USA

All rates - Continental USA (Contiguous 48)
• $6.95 when spending $0-$9.99
• $12.95 when spending $10-$98.99
• Free when spending $99+
• Expedited shipping options available at checkout

Alaska, Hawaii, Territories & Military
Price will be calculated at checkout based on your location. These orders are typically only shipped via USPS Priority.

See FEDEX shipping delivery times by zone from our warehouse in Arizona. 

 


International Shipping
Shipping & duty will be calculated at checkout based on your location. Customs clearance, taxes and duty charges are included in the calculated rate.

Track Your Shipment
A shipment confirmation with tracking information will be sent to your email once the package has been scanned in by the carrier. Oftentimes the packages are scanned late at night.

 


 

 

Local Pickup

Free! We are located at 6100 W Gila Springs Place Suite 13 Chandler, AZ 85226, Open hours are M-F 10AM-5PM. Customers will receive an email once the order is ready for pickup.

 


 

 

Returns

By submitting a request through MakerFlo Crafts, you agree to the conditions listed below. We made these arrangements to ensure you are fully aware of our return procedures. These agreements apply to MakerFlo Crafts customers. 


14-Day Return Policy

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.


Return Conditions

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.


There is a 15% Restocking Fee on Unused Equipment Returns (Printers, Laser Machines, Oven, and Heat Presses).


Return Process 

To start a return, you can contact us at sales@Makerflo.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return questions at sales@Makerflo.com


How can customers return your products?

To initiate a return, just pack up the items you are wanting to return, and have it dropped off at FedEx. The cost of return shipping will have to be incurred by the buyer, unless the items arrived damaged or defective to the customer. Please put a note inside the box saying Return For Refund and the Order Number.


Damages and issues

Please inspect your order upon reception and contact us immediately if the item is defective, or damaged or if you receive the wrong item so that we can evaluate the issue and make it right.


Exchanges

We only exchange products that are damaged, wrong product, wrong size, or defective. If you need to exchange an item please contact us at sales@makerflo.com. The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

If you have any questions about our return policy please contact our customer support team at sales@makerflo.com.


Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded within 7 to 10 business days on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.