Skip to content
Wood
Wood for Laser Cutting by TruFlat 1/8"
Wood for Laser Cutting by TruFlat 1/8"
🎄 Shop 12 Days of Deals Dec 4-15
Save 10% on singles with Build-A-Bundle
Couldn't load pickup availability
Add $99 more for Free Shipping!
Free Shipping on Orders $99+
Pay Later with Sezzle, Afterpay or ShopPay
You may also like
40oz Tumbler
Green / Singles
$7.95
Whiskey Decanter - Square - 750ML
Singles
$13.95
Marble Charcuterie Board
Singles
$39.95
Marble Coaster Set
Singles
$13.95
Marble Serving Board Set
Singles
$16.95
TruFlat Laser Plywood Resources
USE THESE SETTINGS AS A STARTING POINT FOR TRUFLAT. ADJUST AS NECESSARY.
Laser Cutting & Sublimation Settings
xTool
xTool F1
- Cut 8mm/s, 85% power, 4 passes
- Engrave 200 mm/s, 90% power, 8-9 passes (Depending on the size of the cut out) with the f1. Graphics placed in the middle of the engraving area cut best. Bigger graphics may take more passes vs smaller ones. Detailed cuts may cause issues with cutting.
xTool D1 Pro 20w
- Cut 8 speed, 100 power, 3 passes
- Engrave 60 speed, 80 power
xTool S1 20w
- Cut 330 mm/m, 95% power, 2 passes
10W
- Cut 400mm/m, 50% power, 4 passes
- Engrave 2600 mm/m, 60% power
- Score Lines 3000 mm/s, 60% power
M1 10w specific Cut 85/6/2
30W
- Engrave (Speed/Power) : 400/35
- Cut (Speed/Power) : 10/90
40W (GlowForge)
- Engrave (Speed/Power) : Full/Full
- Cut (Speed/Power) : ProofGrade Medium Draftboard
60W
- Engrave (Speed/Power) : 450/50/40
- Cut (Speed/Power) : 15/30/20
75W
- Engrave (Speed/Power) : 200/20/18
- Cut (Speed/Power) : 15/30/20
100W
- Engrave (Speed/Power) : 400/35
- Cut (Speed/Power) : 30/60
Sublimation Temp & Time
While all shades of TruFlat can be sublimated, the most vibrant prints are achieved on White, Maple & Linen. Please use the settings below as a starting point and run test first.
- Temp 385F
- Time Press for 80 seconds
details
Craft Guides
specs
Wood For Laser Cutting 1/8" (0.125 in)
Finally, plywood guaranteed flat! Pre-finished plywood perfect for Laser Cutters, Scroll Saws & CNCs by TruFlat®
Flat • CO² & Diode • Pre-Finished
If you're tired of having to use hold downs and fighting plywood that doesn't stay flat, TruFlat® pre-finished plywood is the solution you've been looking for! TruFlat® stays flat (true to its name) and lets you focus on cutting your next project quickly and easily 🙌
And not only is it flat, but you have five materials to choose from (maple, oak, walnut, black, white, and linen). So now you can turn your good results into great ones with less the hassle 🏆
Why You and Your Laser Engraver Will LOVE TruFlat Wood
With the smooth pre-finish on both sides, you can also engrave and wipe on paint fills with super easy cleanup. You don't even need masking as the paint wipes right off!
-
Affordable Pricing 💰 (so you can make more for less)
-
Pre-Finished on BOTH sides 🏁 just cut and go (this material makes crafting that much more fun)