Wood for Laser Cutting by TruFlat 1/8"

Wood For Laser Cutting 1/8" (0.125 in)

Finally, plywood guaranteed flat! Pre-finished plywood perfect for Laser Cutters, Scroll Saws & CNCs by TruFlat®

Flat • CO² & Diode • Pre-Finished

If you're tired of having to use hold downs and fighting plywood that doesn't stay flat, TruFlat® pre-finished plywood is the solution you've been looking for! TruFlat® stays flat (true to its name) and lets you focus on cutting your next project quickly and easily 🙌

And not only is it flat, but you have five materials to choose from (maple, oak, walnut, black, white, and linen). So now you can turn your good results into great ones with less the hassle 🏆

Why You and Your Laser Engraver Will LOVE TruFlat Wood

With the smooth pre-finish on both sides, you can also engrave and wipe on paint fills with super easy cleanup. You don't even need masking as the paint wipes right off!

• Affordable Pricing 💰 (so you can make more for less)

• Pre-Finished on BOTH sides 🏁 just cut and go (this material makes crafting that much more fun)

• Guaranteed Flat 📏 (you're machine is going to love you for this)

• With a tolerance of +/- 0.015" over 19", the best margin for any wood panel on the market, we guarantee this material will lay flat on your laser bed

• 100% recycled/recovered wood fiber core 🌳 Engineered Tru-Color & Tru-Wood designer faces, Clear acrylic finish on both sides

• No Masking Needed  Using recommended TruFlat settings on a properly set up laser cutter, you can easily wipe off any excess marks

• Easy to Cut & Engrave ✂️🔍 like the pro you already are

• Paint Fills Made Easy 🎨 after you've engraved, simply add paint and wipe off!

• Wipes Clean 🧽 minimizing dust for great results

• 12" x 19" Size 📏 Allows for a variety of projects. Thickness is approximately 3.6mm. Sizes of sheets can vary +/- 1/4"
  

• Sublimation Ready 🌈 Engraving AND sublimation? yes! To sublimate, set your temp to 385F and press for 80 seconds

What materials is TruFlat plywood made of?

TruFlat® is a proprietary process of layering engineered faux wood faces onto both sides of a MDF core sheet. The designer faux wood faces are created through a 6 step painting process to simulate a real wood grain look. The core is made of a defect free standard MDF (medium-density fiberboard) which allows for easy cutting with a laser, CNC router or scroll saw. TruFlat is always sold double sided, so no worries on which side is front or back. TruFlat is not a veneer or laminate material.

Starting Point Laser Settings - from Testers

• 10w Cut 400mm/m, 50% power, 4 passes. engrave 2600 mm/m, 60% power. score lines 3000 mm/s, 60% power
  
  
• M1 10w specific Cut 85/6/2
  
  
• xTool D1 Pro 20w Cut 8 speed, 100 power, 3 passes. engrave 60 speed, 80 power
   
• xTool S1 20w Cut 330 mm/m, 95% power, 2 passes
  
  
• Find more laser settings & sublimation instructions below on our page

Is TruFlat safe to use?

Absolutely! TruFlat should be handled the same as MDF, plywood, and acrylic normally would. When working with any of these materials, it’s important to operate in a well-ventilated space and utilize a dust collector and fume extraction system to ensure a safe working environment. TruFlat items are non-stainable due to the sublimation coating. 

Ready to level up your wood game? Add TruFlat® to your cart and get ready to craft flatter, faster, and more fabulously than ever before! 🛒🚀